EG Edge Computing Gateway Leads Smart Charging and Switching Stations by providing efficient charging and battery replacement services for new energy vehicles. These stations are typically equipped with multiple charging piles, battery replacement equipment, and advanced monitoring and management systems. Charging modes are generally categorized into AC charging and DC charging. AC charging, also known as “slow charging,” is safe and convenient, but can take up to 8-10 hours. DC charging, or “fast charging,” takes about 40-60 minutes on average but can lead to higher battery temperatures, reducing battery capacity. In contrast, the swap mode replaces the battery in just 3-5 minutes, while the replaced batteries can be tested and maintained on-site, further extending their service life.
Traditional charging and switching stations often face numerous difficulties and challenges in operation and management. For instance, the widely distributed sites are difficult to maintain, hardware and software models cannot be flexibly upgraded, and poor signal data can hinder performance. These issues seriously affect the efficient and unified operation of the charging and switching stations.
Solution Introduction
IOTRouter builds an intelligent solution for new energy vehicle charging and switching stations based on EG8200 edge computing gateway to solve the above problems. It realizes comprehensive management of charging and switching station equipment, hardware and network connection. It improves the security, stability and efficiency of the charging and switching station.
How the Edge Computing Gateway Leads Smart Charging and Switching Stations?
1. Station management:
EG8200 Edge Computing Gateway, is a high-performance gateway . It can not only collect key data such as equipment, meters, sensors, cameras, etc., but also clean and pre-process the data. Combined with the IOTRouter cloud platform, EG8200 can display the operating status of the equipment in the charging and switching station in real time, assisting managers to make accurate judgments and decisions.
2. Unified supervision:
This solution can unify the management of each charging and exchanging station, and show the respective operating conditions through the data panel. Managers can quickly deploy and allocate resources to each charging station to realize unified scheduling, unified processing and unified supervision.
3. Monitoring and alarming:
Through this program, not only can it monitor the status of the station in real time, but also alarm immediately when a fault occurs. And the failure information will be notified to the relevant personnel through APP, telephone, SMS and other forms.
4. Remote operation and maintenance:
Users can also control and manage the equipment remotely through EG8200. It can realize remote upgrade system, remote debugging, remote diagnosis and remote configuration. Therefore, it can break the distance boundary and reduce the operation and maintenance cost.
Program benefits
1. Fast and stable network access: 4G networking, saving wiring costs, massive data upload, fast and stable;
2.Real-time monitoring: through the EG8200 gateway, the data generated during the operation of the equipment is quickly transmitted to the background management system. It is convenient for staff to monitor the terminal equipment remotely and dynamically;
3.Management Operation and Maintenance: Through the management system, the staff can view the specific location of the equipment and understand the operation of the equipment. At the same time, for the specific circumstances of each device, data analysis, traffic statistics and many other operations.
4.Reduce the number of patrol personnel: faults quickly locate the maintenance, effectively reduce costs and expenditures.
Increasing the construction of charging and switching stations based on edge computing and IoT technology will help improve the operational efficiency of charging piles and battery switching networks. Edge Computing Gateway Leads Smart Charging and Switching Stations, provide users with convenient and favorable charging and switching services, and promote the development of new energy vehicle industry.