ZHC0921/ZHC0931 LoRa Node
ZHC0921 supports the interface: RS485/AI/DI, and ZHC0931 supports the interface: RS485/DO. The node does not need to be configured. The hardware DIP switch determines the spreading factor and communication channel. When it is powered on, it can connect to the network and build a private network with the concentrator.
Подробнее…
ZHC0921 Description
ZHC0921 is a data collection terminal based on the LoRa private protocol, which communicates with the concentrator ad hoc network, concentrator and server through the ZHC private protocol.
Main Feature:
- No software is required to configure the node
- Time division multiplexing to improve communication efficiency
- Stand by5Device types
- Type R supports a serial port collection command, which can intercept collection responses; supports transparent transmission
- Type A supports one-way AI acquisition, and can be configured with 3 trigger reporting modes
- Type D supports one-way DI collection, and can be configured with 3 trigger reporting modes
- Type AD supports one-way AI and one-way DI collection, and 6 trigger reporting modes can be configured
- Type E supports collection to meetMultifunctional energy meter with DL/T645 protocol
- Support active detection
Имя | Примечания |
9~36V | Диапазон питания DC: 9~36V, размер клемм 5.08mm-2 |
GND | Signal ground |
A.B | RS485*1(A, B) |
AI | 1×4~20mA analog quantity detection |
GND | Signal ground |
DI | 1×default dry node on-off detection |
GND | Signal ground |
РАБОТА | Flash:Connecting to the network 4s off/500ms on:Normal work 3s always on:Fixed-point collection |
ОТПРАВИТЬ | Flashing means data is being sent |
RECV | Flashing means that there is data reception |
РАБОТА | Fast flashing: network access for 4s off/500ms on: normal operation 3s on steady: fixed-point acquisition |
Reset Button | reset |
Dial Code Openturn Off | Decide on channel and frequency |
LoRa Antenna | IPEX base + suction cup antenna (470MHz ~ 540MHz) |
ZHC0931 Description
ZHC0931 is a data acquisition terminal based on the LoRa private protocol, which communicates with the concentrator ad hoc network, concentrator and server through the ZHC private protocol.
Main Feature:
- No software is required to configure the node
- Time division multiplexing to improve communication efficiency
- Support 2 device types
- Type R supports a serial port collection command, which can intercept collection responses; supports transparent transmission
- Type O supportTwo road DO control, Can control DO relay output through transparent transmission command
- Types ofE supports the collection of multifunctional electric energy meters that meet the DL/T645 protocol
- Support active detection
Имя | Примечания |
9~36V | Диапазон питания DC: 9~36V, размер клемм 5.08mm-2 |
GND | Signal ground |
A.B | RS485*1(A, B) |
NO1 | Relay output normally open |
COM1 | Relay common |
NO2 | Relay output normally open |
COM2 | Relay common |
РАБОТА | Flash:Connecting to the network 4s off/500ms on:Normal work 3s always on:Fixed-point collection |
ОТПРАВИТЬ | Flashing means data is being sent |
RECV | Flashing means that there is data reception |
РАБОТА | Fast flashing: network access for 4s off/500ms on: normal operation 3s on steady: fixed-point acquisition |
Reset Button | Сброс |
Dial Code Openturn Off | Decide on channel and frequency |
LoRa Antenna | IPEX base + suction cup antenna (470MHz ~ 540MHz) |